This auger bit is designed for an electric drill. The bit size is 7/16 of an inch. The bit should be 1/16 of an inch smaller than the rod or lag installed. 17 inches overall length with 12 inches of twist.

This auger bit is designed for an electric drill. The bit size is 9/16 of an inch. The bit should be 1/16 of an inch smaller than the rod or lag installed. 17 inches overall length with 12 inches of twist.

This auger bit is designed for an electric drill. The bit size is 11/16 of an inch. The bit should be 1/16 of an inch smaller than the rod or lag installed. 17 inches overall length with 12 inches of twist.

This auger bit is designed for an electric drill. The bit size is 13/16 of an inch. The bit should be 1/16 of an inch smaller than the rod or lag installed. 17 inches overall length with 12 inches of twist.

This auger bit is designed for an electric drill. The bit size is 15/16 of an inch. The bit should be 1/16 of an inch smaller than the rod or lag installed. 17 inches overall length with 12 inches of twist.

This auger bit is designed for hand braces. The bit size is 7/16 of an inch. The bit should be 1/16 of an inch smaller than the rod or lag installed. 17 inches overall length with 12 inches of twist.

This auger bit is designed for hand braces. The bit size is 9/16 of an inch. The bit should be 1/16 of an inch smaller than the rod or lag installed. 17 inches overall length with 12 inches of twist.

This auger bit is designed for hand braces. The bit size is 11/16 of an inch. The bit should be 1/16 of an inch smaller than the rod or lag installed. 17 inches overall length with 12 inches of twist.

This auger bit is designed for hand braces. The bit size is 13/16 of an inch. The bit should be 1/16 of an inch smaller than the rod or lag installed. 17 inches overall length with 12 inches of twist.

This auger bit is designed for hand braces. The bit size is 15/16 of an inch. The bit should be 1/16 of an inch smaller than the rod or lag installed. 17 inches overall length with 12 inches of twist.

This auger bit is designed for an electric drill. The bit size is 9/16 of an inch. The bit should be 1/16 of an inch smaller than the rod or lag installed. 29 inches overall length with 24 inches of twist.

This auger bit is designed for an electric drill. The bit size is 11/16 of an inch. The bit should be 1/16 of an inch smaller than the rod or lag installed. 29 inches overall length with 24 inches of twist.

This auger bit is designed for an electric drill. The bit size is 13/16 of an inch. The bit should be 1/16 of an inch smaller than the rod or lag installed. 29 inches overall length with 24 inches of twist.

This auger bit is designed for an electric drill. The bit size is 15/16 of an inch. The bit should be 1/16 of an inch smaller than the rod or lag installed. 29 inches overall length with 24 inches of twist.

This auger bit is designed for hand braces. The bit size is 7/16 of an inch with a solid center core. The bit should be 1/16 of an inch smaller than the rod or lag installed. 8 1/2 inches overall length.

This auger bit is designed for hand braces. The bit size is 4/16 of an inch with a solid center core. The bit should be 1/16 of an inch smaller than the rod or lag installed. 7 1/2 inches overall length.

This auger bit is designed for hand braces. The bit size is 5/16 of an inch with a solid center core. The bit should be 1/16 of an inch smaller than the rod or lag installed. 7 1/2 inches overall length.

This auger bit is designed for hand braces. The bit size is 9/16 of an inch with a solid center core. The bit should be 1/16 of an inch smaller than the rod or lag installed. 9 1/2 inches overall length.

This ship auger bit is designed for an electric drill. The bit size is 9/16 of an inch. The bit should be 1/16 of an inch smaller than the rod or lag installed. 42 inches overall length with 24 inches of twist.

This ship auger bit is designed for an electric drill. The bit size is 11/16 of an inch. The bit should be 1/16 of an inch smaller than the rod or lag installed. 42 inches overall length with 24 inches of twist.

This ship auger bit is designed for an electric drill. The bit size is 13/16 of an inch. The bit should be 1/16 of an inch smaller than the rod or lag installed. 42 inches overall length with 24 inches of twist.

This ship auger bit is designed for an electric drill. The bit size is 15/16 of an inch. The bit should be 1/16 of an inch smaller than the rod or lag installed. 42 inches overall length with 24 inches of twist.

Each

Each

Each

Each