This saw has a "C" style handle with a 13 inch blade. 7 points per inch. Cuts on pull stroke

This saw has a "C" style handle with a 13 inch gullet blade. 7 points per inch. Cuts on pull stroke

This curved prunning saw has a 13 inch blade, 7 points per inch. Overall length: 21" Hardwood horn grip handle.

This curved prunning saw has a 13 inch gullet blade, 7 points per inch. Overall length: 21" Hardwood horn grip handle.

This stationary saw has a 13 inch blade. 7 points per inch. Extra long pitch.

Tri-edge design. 12 inch cutting edge with 7 points per inch, Pistol grip, hardwood handle. Cuts on pull stroke.

This is a 13 inch curved saw. 7 points per inch.

This is a 13 inch curved saw with a D-Style handle. 7 points per inch.

This saw has a 7 inch blade at 7 points per inch with a plastic handle.

This saw has a 7 inch blade with 7 points per inch. Rubber grip handle.

This folding saw has a 6 inch blade length at 7 points per inch. 14 inches overall length.

This saw has a red plastic sheath. 7.5 inch blade and plastic handle. 7 points per inch. Cuts on pull stroke.

This K-24 Fanno was designed by us to: (1) Cut fast; (2) Cut through 20 inch limb as well as 1" limb because the gullets take out the dust: no binding.

This 19 inch fast cutting Fanno saw is handmade, hand-filed, and honed. Made of 18 gauge special formula saw steel. Laminated handles.

This 22 inch fast cutting Fanno saw is handmade, hand-filed, and honed. Made of 18 gauge special formula saw steel. Laminated handles.

This 24 inch fast cutting Fanno saw is handmade, hand-filed, and honed. Made of 18 gauge special formula saw steel. Laminated handles.

A 24 inch 6 point saw. It is wider throughout than the No. K-8 and does not have gullets. Laminated hardwood handle.

This 22 inch saw is made especially for rapid cutting of any size limb. Laminated hardwood handle. . There are 5 1/2 points per inch on this saw.

A small saw which was designed for orchard pruning. Small teeth enables efficient cutting without tearing. 13 inch cutting edge with 7 points per inch. 8 inch hardwood handle that does not fold.

This saw has a two handed handle design to cut large limbs with maximum speed. Self-feeding and self-cleaning blade. 13 inch cutting blade. 6 points per inch.

Tri-edge design. 12 inch cutting edge, 6 teeth per inch. Contoured, laminated, hardwood handle. Cuts on pull stroke.

This is a 13 inch curved saw. 6 points per inch.

13” tri-edge curved saw. 6 points per inch.

This saw is 16 inches with lance teeth of 18 gauge steel with hardwood pistol grip handle. Will take any size limb. Laminated handle.

This saw is 20 inches with lance teeth of 18 gauge steel with hardwood pistol grip handle. Will take any size limb. Laminated handle.

This is a 14 inch curved hand saw with gullets. Fast-cutting Japanese design. 7 points per inch.

This is a 17 inch curved saw with 6 points per inch. Fanno has combined the best Japanese high technology with Fanno quality to produce a fast smooth cutting saw. Extra heavy blade construction.

This folding saw has a 81/2inch handle with a 71/2 inch blade-6 points per inch. Ideal for carrying on the belt or in the glove compartment of the car. As a saw to take on inspection trips to examine injured or diseased trees, it is unsurpassed.

This folding saw has a 91/2inch handle with a 9 inch blade-6 points per inch. Ideal for carrying on the belt or in the glove compartment of the car. As a saw to take on inspection trips to examine injured or diseased trees, it is unsurpassed.

This folding saw has a 121/2 inch handle with 101/2 inch blade-6 points per inch. Ideal for carrying on the belt or in the glove compartment of the car. As a saw to take on inspection trips to examine injured or diseased trees, it is unsurpassed.

This folding saw has a 15 inch handle with a 14 inch blade-6 points per inch. Ideal for carrying on the belt or in the glove compartment of the car. As a saw to take on inspection trips to examine injured or diseased trees, it is unsurpassed.

This folding saw has a 7 inch cutting length with 7 points per inch and a wooden handle.

This product is a 13 inch curved saw. 7 points per inch with a hardwood handle.

This product is a 13 inch curved saw. 7 points per inch with a plastic handle.

Fast cutting Japanese design. Hard chrome platted blade. 121/2 inch blade length. Overall length is 19 inches.

This fast cutting Japanese design folding saw has a 6 inch blade and is 14 inches overall.

Fast cutting Japanese design. Folding Saw with locking blade.

This folding saw has a locking blade. 8 1/2 inch blade. 7 teeth per inch. Overall length is 17 inches. Rubber handle with grip molded to blade.

This folding saw has a locking blade. 12 inch blade. 9 teeth per inch. Overall length is 20 inches. Rubber inserted processed steel handle.

This saw has a 12 inch blade with 7 teeth per inch. Overall length is 17 inch. Molded rubber handle. Plastic sheath included.

This saw has a 12 inch blade with 7 teeth per inch. Overall length is 18 inches. Rubber hand grip encases the blade. Plastic sheath included.

This saw has a 15 inch blade length. 7 points per inch. 22 inches overall length. A large and comfortable rubber hand-grip. Comes with scabbard

This saw has a 13 inch curved blade. 7.5 teeth per inch. Molded rubber handle. Plastic scabbard included.

14” blade length. 5.5 points per inch. 22” overall length.

Dual-purpose saw with fine teeth at the tip (8 points per inch) for smaller branches and large teeth (6 points per inch) for large branches.

Aluminum head with 16" (5 1/2 points per inch) steel blade attached by bolt and wing nut. Blade adjustable to three positions. Head has large hook with outside horn for pushing branches. raising ropes, etc. and a spring tension paint brush holder.

Mounts directly to round fiberglass pole (no need for a head adapter). Can also be used on wood poles. If fiberglass pole is hollow, insert 6" wood core (plug) into top of pole & install bolt that comes with head, through the head, the fiberglass pole & the wood core.

17" blade, 5 1/2 points per inch. Will fit any Pole Saw Head shown below.

Same as No. 5-S (above) expect 18" blade. 5 points per inch. Will fit any Pole Saw Head shown below.

Japanese designed fast cutting Pole Saw Blade, 13” curved blade. 6 points per inch.

Japanese designed fast cutting Pole Saw Blade. 17" curved blade. 6 points per inch. Adjustable to two positions. Extra heavy blade construction. Also serves as replacement blade for FI-1700 Saw.

Japanese designed fast cutting Pole Saw Blade with gullets.

Pole Saw Blade, 16" curved blade, 8 points per inch. Adjustable to two positions.

Japanese designed fast cutting Pole saw blade. 7 points per inch. Fits No. 20H & No. 25 pole saw heads.

Same as No. 40569 above with gullets to take out saw dust.

Japanese designed fast cutting Pole saw blade. 7 points per inch. Fits No. 20H & No. 25 pole saw heads without gullets.

Japanese designed fast cutting Pole Saw Blade. 13" curved blade. 6 points per inch.

Saw sharpener. File for sharpening new, Tri-cut Japanese technology hand saws: ARS, Corona, FI. Series, & JSM. File length 4". O.A. length including wood handle 8 1/2". Instructions included.

For Fanno -No. 4, No. 14,FI-1311, No. FI-130PG & No. FI-K1500.

Corona - #413 & 413P. JSM 13.

ARS - #40060 & #40059.

For ARS - #40076 & PS-25KL. FI-1214, JSM-12, & F-61 Saws

No. 14-62 14" belting curved scabbard with attached No. 62 hand pruner case.

For No. 40076 ARS, PS-25KL ARS, FI-1214, JSM-12, & F-610 Saws.

For Fanno No. 4, No. 14, No. FI130PG & No. FI-1311. Corona No. 413. JSM No.13. ARS No. 40060, & No. 40059 Saws.

For No. 20B, Fanno FI-125S, FI-13S, ARS 40567, & 40569.

(for No. 17s-b, No. 5S and No. 9S Fanno pole saw blades.)

For No. 22, 24, and K-24 Fanno Saws & Seymour Smith No. 624.

For No. 14 Fanno, No. 4 Fanno, No. FI130PG Fanno, Corona - No. 413, JSM 13, ARS - No. 40060, No. 40059, & FI-1311 Saws.

For Fanno #20 Saw

(for No. 17 Fanno)

For Fanno - No.16, FI-K1500 & FI1700.

Seymour Smith #570.

This fast-cutting 16 inch saw (7 points per inch) with large, deep teeth with heavy set, which prevents binding or filling up. Easily sharpened and maintained. CLOSEOUT

This fast-cutting 24 inch saw (41/2 points per inch) with large, deep teeth with heavy set, which prevents binding or filling up. Easily sharpened and maintained. CLOSEOUT

The 6” Cant File is recommended by the Fanno Co. for standard saws (non Japanese).

BOX OF 12

The “safe back” Cant File is easier for inexperienced filers to use because it has two blank sides.

BOX OF 12

Mounts directly to round Jameson fiberglass pole with female ferrule and includes the head adapter. WT. 12 oz.

Heavy duty aluminim alloy telescoping pole saw with three extensions reaching 18'. Push buttons allows multiple length adjustments with safety clamps to hold the extension firmly in place. Rubber hand grip for holding.15" blade with 7 points per inch. Has upper sickle to cut vines and a lower sickle to undercut bark. Plastic cover for blade included.

A lightweight extension polesaw with the Silky Longboy 14" blade. Telescoping oval pole extends from 4.75 to 12 feet.